RC Bionic Butterfly Flight Controller Board
$248.76
Description
Build around the control electronics, not a complete aircraft. This listing's selected option is a flight controller board for an RC bionic butterfly project. The exposed circuit board brings the pictured servo, battery and light-strip connections together, with a USB port and antenna visible in the product images.
The supplied control-mode diagram illustrates ELRS/PPM with a receiver and remote, ESP-NOW with a remote, and Wi-Fi with a phone. Treat these as documented control routes to check against your chosen hardware and firmware, not a promise that any transmitter or phone setup will work without configuration.
What This Component Is For
This is the electronics component option for a bionic butterfly build, rather than a ready-to-fly butterfly. Use the labelled photographs to plan the connection layout and compare the board with your project's requirements before installation.
A controller alone does not establish aircraft performance. Do not assume that wings, servos, a battery, a transmitter, a receiver, lighting or a mounting bracket come with this option simply because they appear in system-level descriptions or control diagrams.
Image-Documented Connections
| Selected option | Flight controller |
|---|---|
| Servo ports | Two ports labelled ZH1.5mm |
| Battery port | Labelled PH2.0 |
| Light-strip ports | Two ports labelled MX1.25 |
| Other pictured features | USB port, antenna and switch |
| Illustrated control routes | ELRS/PPM, ESP-NOW and Wi-Fi |
Planning Your Build
Match connector type as well as electrical requirements, pinout, firmware and control setup. A plug that physically fits does not establish correct polarity or a suitable operating voltage. Check the board instructions before selecting a battery or connecting servos and lighting.
Use the control-mode illustration as a system overview, not a wiring guide or contents list. Keep receiver and transmitter selection separate from the board purchase, and establish the configuration process before planning a flight demonstration.
Frequently Asked Questions
Is this a complete RC butterfly?
No. The current option is Flight controller. Treat this listing as the controller-board option, not a complete aircraft or ready-to-fly kit.
Which ports are labelled in the images?
The diagrams label two ZH1.5mm servo ports, a PH2.0 battery port, two MX1.25 light-strip ports, USB, an antenna and a switch.
Which control routes does the diagram show?
It shows ELRS/PPM with a receiver and remote, ESP-NOW with a remote, and Wi-Fi with a phone. Check your specific hardware, firmware and setup instructions before selecting a control route.
Important Notices
This is an exposed electrical project component. Confirm operating ratings, polarity, connector pinout and firmware requirements before applying power. Disconnect power before changing wiring or adjusting the mechanism. Protect the board from short circuits and keep clear of moving parts during testing.
System illustrations do not establish package contents or guarantee stable flight, hovering, aerial rolls or commercial-performance suitability. Those outcomes depend on the complete build, configuration and operating conditions.
Photographs and diagrams illustrate the controller and possible system connections. Connector labels alone do not establish electrical compatibility or included accessories.
