Solid Brass Cabinet Pull — Minimalist Handle for Wardrobes, Kitchens & Wine Cabinets
$109.52
Description
Solid brass minimalist cabinet pull handles, precision-cast from 100% solid brass — not hollow, not zinc-plated, not pot metal. Each handle is built for longevity: tarnish-resistant, heavy in hand, and engineered for over 100,000 open/close cycles. The design language sits at the intersection of New Chinese minimalism and European craft — clean silhouettes, a subtle surface grain, and a warm brass tone that works equally well in modern kitchens, fitted wardrobes, wine cellars, bathroom vanities, and bespoke joinery. Available in 33 size and style combinations from 49mm to 200mm center-to-center. Select your size from the variant selector — where two options share the same measurement, each corresponds to a distinct handle model identifiable by its variant image.
Size & Variant Guide
The size shown in the variant selector refers to the center-to-center measurement — the distance between the two screw holes. This is the critical measurement for fitting to existing cabinetry. Measure your existing hole spacing before ordering.
Where two variants share the same center-to-center measurement (e.g. two entries at 99mm, 100mm, 130mm, 138mm, 150mm, 165mm, 170mm, and 200mm), each represents a different handle model or finish within that size. Review the variant image to distinguish between models before selecting.
| Center-to-Center | Models Available |
|---|---|
| 49mm | 1 |
| 60mm | 1 |
| 88mm | 1 |
| 90mm | 1 |
| 99mm | 2 models |
| 100mm | 2 models |
| 104mm | 1 |
| 110mm | 2 models |
| 116mm | 1 |
| 120mm | 1 |
| 125mm | 1 |
| 130mm | 2 models |
| 133mm | 1 |
| 134mm | 1 |
| 135mm | 1 |
| 137mm | 1 |
| 138mm | 2 models |
| 150mm | 2 models |
| 155mm | 1 |
| 165mm | 2 models |
| 170mm | 2 models |
| 180mm | 1 |
| 185mm | 1 |
| 200mm | 2 models |
Product Details
- Material: 100% solid brass — not hollow, not zinc alloy, not plated steel
- Finish: Natural brass — warm gold tone with subtle surface texture
- Fixing: Two-screw pull bar fixing. One fixing screw included per handle.
- Sizes: 33 options from 49mm to 200mm center-to-center
- Durability: Tested to 100,000+ open/close cycles
- Applications: Kitchen cabinets, fitted wardrobes, wine cellar racks, bathroom vanities, wooden dressers, custom joinery
- Style: New Chinese minimalism meets European craft — clean silhouette, subtle grain texture
Installation
- Measure the existing hole spacing (center-to-center) on your cabinetry before ordering.
- If drilling new holes, mark both fixing points using the handle as a template before drilling.
- Insert the included fixing screw from the inside of the cabinet door through to the handle. Use a screwdriver — do not overtighten, which may stress the brass thread.
- For hardwood or MDF doors, pre-drill a pilot hole to the screw diameter to avoid splitting.
- If replacing existing handles, the new center-to-center must match the existing hole spacing precisely.
Frequently Asked Questions
Q: Is this solid brass or brass-plated?
A: Solid brass throughout — not hollow, not zinc alloy with brass plating. Solid brass will not chip, flake, or corrode through to a base metal underneath.
Q: Will the finish tarnish over time?
A: Natural brass develops a subtle patina with use and age, which many consider desirable. To maintain a polished appearance, wipe with a soft dry cloth after handling and apply a thin coat of brass polish periodically.
Q: How do I know which size to order?
A: Measure the distance between the centre of your two screw holes — this is the center-to-center measurement. Match this to the size listed in the variant selector. If you are installing into new cabinetry with no existing holes, select based on the visual proportion of the handle relative to your cabinet door width.
Q: Are screws included?
A: One fixing screw is included per handle. Standard M4 cabinet screws — replacements are widely available at hardware stores if longer screws are needed for thicker doors.
Q: Can I order multiple handles?
A: Yes — adjust quantity at checkout. For kitchen or wardrobe projects requiring 10+ handles, contact us for volume pricing.
Care & Maintenance
- Wipe with a soft dry cloth to remove fingerprints and moisture after use.
- For deeper cleaning, use a mild soap solution on a damp cloth — dry immediately. Do not soak.
- Avoid abrasive cleaners, steel wool, or acidic solutions which will scratch or dull the surface.
- Apply a thin coat of beeswax or paste brass polish 1–2 times per year to maintain lustre and slow patina development.
- In high-humidity kitchens or bathrooms, wipe dry more frequently to prevent water spots.
Shipping & Handling
Handles are individually wrapped and packed to prevent surface contact and scratching in transit. Standard tracked international shipping included. Delivery typically 7–21 business days from dispatch.
Inspect upon delivery. Contact us within 24 hours with photographs if any handle arrives with surface damage or deformation.
Solid brass cabinet pull handles. 100% solid brass construction — not hollow or plated. Tarnish-resistant. 100,000+ cycle tested. 33 size and style options from 49mm to 200mm center-to-center. One fixing screw included per handle. Suitable for kitchen cabinets, wardrobes, wine racks, bathroom vanities, and custom joinery. Specifications sourced from supplier documentation.

