6-Arm RGBW Moving-Head Stage Light with Laser & Strobe Effects
$264.66
Description
Add moving colour and layered effects to an indoor lighting setup with this six-arm RGBW moving-head stage light. It combines coloured beams, white and warm strobes, an RGB strip effect and red/green laser patterns in one fixture.
Build a programmed sequence using 26-channel DMX512, or choose the listed auto, sound-active or master/slave modes for your setup. Picture a small stage changing from a coloured beam scene to a controlled movement cue, with each effect chosen for the venue rather than left to chance. The fixture is rated IP20 for indoor use; laser and strobe effects require careful placement and informed operation.

Why This Moving-Head Light
- Layered effects: RGBW beams, white/warm strobes, RGB strip lighting and red/green laser patterns offer different visual elements within one fixture.
- Moving beam arrangement: The listed X-axis travel is 540°, with 90° Y-axis movement.
- Programmed control: Standard DMX512 with 26 channels supports integrating the fixture into a planned lighting sequence.
- Standalone choices: Auto and sound-active modes offer alternatives to external programming, with listed speed and sensitivity adjustment.
- Connection access: Three-pin XLR input/output and a four-digit display support setup and addressing.

What Is It For & How It Helps
This is an effects fixture for indoor parties, club events and small-stage performances, not a general room lamp. Choose DMX when you need planned cues, auto for a built-in sequence or sound-active operation when audio-responsive changes suit the event.
Assess the space before choosing the fixture: projection surfaces, audience position, movement clearance and control capability all matter. The listed 3–5 m projection distance is a setup reference, not a safe laser-exposure distance or a guarantee of coverage. Test cues and beam placement before admitting guests.
Effect photographs illustrate colour and patterns. Actual visibility depends on ambient light, the projection surface and atmospheric conditions; do not assume every pictured aerial beam will look identical in a clear, brightly lit room.
Technical Specifications
| Input | AC 110–240 V, 50/60 Hz |
|---|---|
| Power listings | 150 W rated; 120 W listed actual total |
| LED sources | 10 × 10 W RGBW; 2 × 10 W white strobes; 2 warm-light strobes; 23 × 0.2 W RGB LEDs |
| Laser sources | Listed red: 100 mW at 650 nm; green: 50 mW at 515 nm |
| Movement | X axis 540°; Y axis 90° |
| Dimming and strobe | 0–100% linear dimming; 1–20 Hz strobe |
| Control | Auto, sound-active, master/slave and DMX512; 26 channels |
| Data and display | Three-pin XLR input/output; four-digit digital display |
| Projection reference | Listed optimal distance: 3–5 m |
| Protection and environment | IP20; listed operating temperature −10°C to 40°C |
| LED life | Listed average: 10,000 hours, not a service-life guarantee |
| Illustrated dimensions | Head span approximately 28 cm; base 23 × 16 cm; height 19 cm |
| Illustrated weight | Approximately 2.8 kg |
| Package | One fixture, power cord, hook bracket and instruction manual |
Tips & Suggestions

Small-stage cues
Program a restrained starting scene and build movement around performance transitions. Check the entire beam path and moving parts before the show; more effects at once do not automatically improve a cue.
Indoor party setup
Choose a dry, controlled location with secured cables and ventilation clearance. Plan beam placement away from guests’ eyes and reflective surfaces rather than pointing effects through a crowded room.
DMX programming
Use the supplied channel map, set the starting address and allow the full 26-channel allocation in your controller patch. Confirm blackout and cue behaviour during rehearsal rather than assuming control layouts match other fixtures.
Sound-active operation
Adjust sensitivity and speed for the actual audio environment. Test at event volume, supervise operation and review the resulting movement and laser paths before allowing guests into the area.
Master/slave coordination
Follow the manual’s linking instructions and mode settings for compatible fixtures. Rehearse the complete group together, keeping each unit’s movement envelope and beam paths clear.
Mounting and cable planning
Use qualified installation for elevated mounting, rated hardware and an appropriate secondary safety attachment as required by the manual and venue. The listed bracket alone is not a complete rigging plan. Keep power and data cables clear of moving parts.
Rehearsal and effect balance
Test projection at the listed 3–5 m reference distance, then adjust the setup for your venue without treating that distance as a safety rule. Use strobes thoughtfully, warn attendees about flashing effects and provide a non-flashing scene where appropriate.
Not Ideal For
Not for outdoor or wet-location use, general room illumination or unsupervised operation by children. IP20 is not a weatherproof rating.
Not a suitable choice if you need a fixture without laser effects, cannot control exposure and mounting safely, or require a standard room lamp. Do not select it on the assumption that built-in patterns make audience laser scanning safe.
Frequently Asked Questions
Which control modes does the light support?
It lists auto, sound-active, master/slave, and DMX control, using the standard DMX512 protocol with 26 control channels.
What projection distance is recommended?
The listed optimal projection distance is 3–5m (9.8–16.4ft). Treat this as a setup reference and test the effect from your actual fixture position.
Which plug option should I choose?
The available options are EU Plug and US Plug. Choose the option suited to your local outlet, and confirm the listed AC 110–240V, 50/60Hz input is appropriate for your setup.
Can I use this light outdoors?
The listed protection rating is IP20, so this fixture is not intended for outdoor or wet-location use.
What is included in the package?
The listed package includes one light fixture, one power cord, one hook bracket, and one instruction manual.
Important Notices & Disclaimers
Electrical, laser and flashing-light precautions: Read the complete instruction manual and product safety labels before installation or operation. Use an appropriate grounded supply and the correct plug option. Disconnect power before servicing and use qualified personnel for electrical work or overhead mounting.
Never look directly into laser apertures or aim laser beams at eyes, people, vehicles or aircraft. Prevent hazardous reflections and unintended access to beam paths. Do not use audience scanning. Follow applicable laser regulations, venue requirements and the manufacturer’s classification-specific instructions; a pattern effect does not establish eye safety.
Strobe effects may affect people with photosensitive conditions. Warn attendees and avoid flashing effects where unsuitable. Keep the fixture dry, ventilated and clear of moving obstructions.
The 150 W rated figure and 120 W listed actual total are distinct source values. Use the fixture label and manual for circuit planning. The 3–5 m projection reference is not a laser-safety distance.
Illustrated dimensions and weight are approximate and do not represent packed shipping measurements. Product images show effect examples, not guaranteed brightness or coverage in every venue. Do not infer local electrical certification or laser compliance from imagery.
Shipping & Delivery
Before ordering
Confirm EU Plug or US Plug, your supply requirements and delivery address. Refer to checkout delivery information and the store shipping policy before committing the fixture to an event date.
Unpacking and inspection
Check for the fixture, power cord, hook bracket and manual. Inspect lenses, housing, connections and moving parts for transit damage before powering on; keep the packaging if you need to report an issue.
First setup
Complete installation and safety checks using the manual, then test in a controlled, unoccupied area. If the item is damaged or differs from your order, contact the store with order details and clear photographs before use.
Indoor effects-lighting equipment with lasers and strobes. Follow the manual, safety labels and applicable regulations. Images illustrate effects; actual results depend on setup.

